10 Lathe Training Courses
We've compiled a diverse selection of lathe training courses that your workers can take to learn how to operate lathes safely and effectively. These specialized courses go over topics like hazard assessment, shop safety, feed mechanisms, lathe controls, and different types of turning components.
1. Lathe Safety
Help your lathe workers brush up on lathe handling and safety procedures with EdApp's Lathe Safety course! It's an easy-to-follow course that covers all the basics. First, the course introduces your workers to the different types of lathes, including bench lathes, speed lathes, engine lathes, capstan lathes, turret lathes, and automatic lathes.
Then, it dives into feed mechanisms, control modes, and essential safety protocols like wearing PPEs, following the machine manufacturer's operating manual, and stopping during malfunctions.
This lathe training course also walks your team through common injuries from lathe accidents, such as hand lacerations, broken fingers, shrapnel in the eyes, and even burns. So not only will they learn how to handle a lathe safely, but they'll also be aware of the potential dangers and how to avoid them.
To get started, you can easily import this 4-part course from EdApp’s course library - all for free. You can also edit the lessons, add your branding, and make other any necessary changes before distributing it to your team. And here's a bonus: with EdApp's Canva integration, you can spruce up your course designs without needing a third-party design tool.
- Cost: Free
- Scope: Types of lathes, feed mechanisms, control modes, safety protocols, common injuries from lathe accidents
Created by EdApp
Explore the course
2. Manual Centre Lathe (Turning)
TDR Training designed the Manual Centre Lathe (Turning) course to teach workers how to control, inspect, and maintain center lathes effectively. Aside from providing an introduction to machine parts and different lathe controls, it also highlights the importance of manual machining health and safety, hazard identification, and PPE requirements. This lathe training course also talks about setup and shutdown protocols, feed rates, turning techniques, defect recognition and repair, as well as correct work and tool holding methods. Overall, the course consists of 13 specialized sub-topics with a practical competence test at the end. Another huge perk is that the online training software provides learners with a nationally recognized certificate of competence upon course completion.
- Cost: Request a quote
- Scope: Health and safety, hazard identification, PPE requirements, centre lathe setup/shutdown, turning, troubleshooting
Created by TDR Training
Explore the course
3. Lathe Skill Upgradation Course
Torque Technics Training Institute’s Lathe Skill Upgradation Course will provide your workers with pretty much everything they need to know about lathes and safe practices in the workplace. It starts off by exploring vital lathe parts and introducing workers to both precision and non-precision instruments. This lathe training course also delves into the different types of lathe operations, including turning, square thread cutting, left-hand BSW thread cutting, taper turning, grooving, knurling, and boring. Workers will also learn how to grind tools on a bench grinder as well as center their work on a 4 Jaw Chuck. Overall, there are a total of 9 training lessons, which they’re required to take in-person.
- Cost: Request a quote
- Scope: Lathe parts, precision and non-precision instruments, lathe operations such as turning, grooving, knurling, and boring
Created by Torque Technics Training Institute
Explore the course
4. Machine Shop Turning Operations
TPC Training developed the Machine Shop Turning Operations course for machine shop personnel who want to learn how to use and maintain different types of lathes and their attachments. The first part of the lathe training course walks learners through engine lathes, including their parts, capacity, and steady and follower rests. It also covers specialized sub-topics like stock preparation and centering, drilling, boring, reaming, threading, and turning operations. It then touches on the importance of cutting speed and feed as well as cutting fluids and coolants.
By the end of the course, workers can expect to gain a better foundational knowledge of lathe operations and machine shop safety. Learners also have the option of purchasing additional online training benefits like the machine shop turning operations course manual for $67 USD.
- Cost: $85 USD
- Scope: Engine lathe parts, lathe capacity, steady and follower rests, lathe operations, cutting speed and feed, cutting fluids and coolants
Created by TPC Training
Explore the course
5. Centre Lathe Turning training
Designed for beginner industrial workers, the Centre Lathe Turning course by Make UK covers the underpinning theories and practical applications that are needed to work safely with vertical milling machines. Throughout the lathe training course, workers can expect to learn more about center lathes, including awareness presentations, safety considerations, machine controls and operation, types of turning tools, speed and feed calculations, use of tailstock, and cutting control. It also discusses more specific lathe operations like turning, drilling, work holding, and threading. This online course allows workers to gain essential knowledge they’ll need to broaden their overall industrial engineering skill set. Whilst there is no formal assessment on this course, learners are required to demonstrate in person that they can safely operate a center lathe.
- Cost: £840 GBP +VAT for Make UK members, £892 GBP +VAT for non-members
- Scope: Safety considerations, machine controls and operation, types of turning tools, speed and feed calculations, use of tailstock, cutting control, lathe operations
Created by Make UK
Explore the courseExplore our library including lathe training courses
6. Lathe Refresher
West College Scotland’s Lathe Refresher is a comprehensive lathe training course that contains general information about center lathe turning practices and safety precautions. It provides lathe experienced lathe operators with refresher training lessons on machine controls and operation, setting tools, turning stepped shafts, controlling the cut, and drilling to depth. It also talks about the different types of turning tools and how to operate them. Through this course, you can ensure that your workers are getting up-to-date training content, which in turn can make it easier for them to manufacture parts and components and comply with safety regulations. While the course isn’t free, this refresher training platform allows learners to enjoy perks like face-to-face training sessions as well as completion certificates.
- Cost: £300 GBP
- Scope: Machine controls and operation, setting tools, turning stepped shafts, controlling the cut, drilling to depth, types of turning tools
Created by West College Scotland
Explore the course
7. CATIA V5 Lathe Training
The CATIA V5 Lathe Training course by Technia can help workers understand and utilize different methodologies for lathe machining. It focuses on various turning operations such as recess, rough, profile finish, sequential, ramp recess, ramp rough, groove, groove finish, and thread turning. Your workers can also expect a quick overview of lathe machine methodologies as well as tool assemblies management. A huge perk of this training program is that workers can learn directly from highly specialized trainers with years of industry experience. They’ll also have access to dedicated training facilities, on-hand training coordinators, lunch and refreshments during in-person training, as well as personal attendance certificates.
- Cost: Book a session
- Scope: Turning operations, lathe machine methodologies, tool assemblies management
Created by Technia
Explore the course
8. Lathe Machine Operation
Lathe Machine Operation is a lathe training course by MFI Polytechnic Institute that contains fundamental information about lathe operating protocols, proper measurement techniques, and machine shop safety. Some of the specialized topics covered in this course include mechanical working drawings, lathe machine parts and functions, lathe accessories, and measuring instruments such as vernier and micrometer caliper. The course takes 40 hours to complete and by the end of their training, learners will be able to interpret basic mechanical drawings, identify machine components, understand the importance of shop safety, and perform basic lathe machine operations. Workers don’t need to worry about taking any prerequisites for this course but do take note that it costs a hefty P10,000 PHP or approximately $190 USD for the whole program.
- Cost: P10,000 PHP
- Scope: Lathe operations, shop safety, mechanical working drawings, lathe machine parts and functions, lathe accessories, measuring instruments
Created by MFI Polytechnic Institute
Explore the course
9. Basics of the CNC Lathe 211
Tooling University’s Basics of the CNC Lathe 211 course is a specialized training program designed for CNC lathe operators and supervisors. Mainly, it focuses on the components and functions of both the chucker and bar machine CNC lathe varieties. Some of the topics covered in this lathe training course include the types of CNC lathes, common components of CNC lathes, cutting variables, inner and outer diameter operations, cutting tools, tool holders, and CNC lathe work holding.
By the end of this course, workers are expected to understand how CNC lathe components move during cutting operations and create precise parts safely and consistently. Overall, the intermediate course has a total of 15 lessons and once learners have completed the entire program, they’ll be eligible for both the CNC Lathe Operations and CNC Turning Programming, Setup, & Operation certifications.
- Cost: Request a session
- Scope: Types of CNC lathes, common components of CNC lathes, cutting variables, inner and outer diameter operations, cutting tools, tool holders, CNC lathe work holding
Created by Tooling University
Explore the course
10. Control Panel Functions for the CNC Lathe 251
Control Panel Functions for the CNC Lathe 251 is another lathe training course developed by Tooling University. It’s specifically designed for manufacturing employees, supervisors, and managers who are responsible for operating CNC lathes. The course delves into operator responsibilities, CNC control panels and control display, manual control modes, MDI and single block mode, and basic lathe controls. It also highlights other technical aspects of CNC lathe operation, including overrides, optional stop and block delete, turret indexing, chip conveyor, and proving out. All in all, the course is divided into 18 lessons, and workers who complete the training program are qualified to receive CNC Lathe Operations, CNC Turning Programming, Setup, & Operation, and CNC Turning: Programming, Setup, and Operations-FastTrack certifications.
- Cost: Request a session
- Scope: CNC control panels and control display, manual control modes, MDI and single block mode, and basic lathe controls, overrides, optional stop and block delete, turret indexing, chip conveyor, proving out
Created by Tooling University
Explore the coursePractice safe lathe operations with lathe training courses
Lathes are versatile machining tools used primarily for shaping metal or wood. These complex equipment can be dangerous to operate and without proper training, workers run the risk of sustaining injuries like fractures, lacerations, finger or limb amputations, and crushed hands or arms. To prevent such incidents, workers must be equipped with a training certification or license before handling any lathe equipment on the job site. As an employer, it’s your responsibility to provide your employees with comprehensive lathe training to help them get their certification and ensure that they can operate lathes safely. To help you get started, we’ve provided a detailed list of lathe training courses that will ensure that your workers can manufacture parts and components precisely and safely.